ITE SWITCHING POWER SUPPLY - SINGLE OUTPUT - 75 W - 12 V - CLOSED FRAME

Fora de catálogo

Avisar-me quando estiver disponível

Precisa de ajuda? Partilhar produto

Descrição

universal AC input / full range

cooling: by free air convection

LED indicator for power on

100 % carga completa prueba 'burn-in'

using 105 °C long-life electrolytic capacitors

withstands 300 VAC surge input for 5 seconds

high operating temperature up to 70 °C

withstands 5G vibration test

no load power consumption < 0.5 W

high efficiency, long life and high reliability

3 years warranty

protection against: short circuit / overload / overvoltage

Especificaciones

output:

tensión DC: 12 V

corriente nominal: 6 A

current range: 0 - 6 A

rated power: 72 W

ripple & noise (max.): 120 mVp-p

voltage adj. range: 10.8 - 13.2 V

voltage tolerance: +/- 1.0 %

line regulation: +/- 0.5 %

load regulation: +/- 0.5 %

setup, rise time:

500 ms, 30 ms / 230 VAC

1200 ms, 30 ms / 115 VAC at full load

hold up time (typ.):

60 ms / 230 VAC

14 ms / 115 VAC at full load

entrada:

rango de tensión:

88 - 264 VAC

125 - 373 VDC

withstands 300 VAC surge for 5 s

frequency range: 47 - 63 Hz

efficiency (typ.): 84.5 %

AC current (typ.):

2 A / 115 VAC

1.2 A / 230 VAC

inrush current (typ.): cold start 40 A / 230 VAC

leakage current: < 2 mA / 240 VAC

protection:

overload:

110 - 150 % rated output power

protection type: hiccup mode, recovers automatically after fault condition is removed

overvoltage:

13.8 - 16.2 V

protection type: hiccup mode, recovers automatically after fault condition is removed

environment:

operating temperature: -25 to +70 °C

humedad de funcionamiento: 20 - 90 % RH non-condensing

storage: -40 to +85 °C, 10 - 95 % RH

temperature coefficient: +/- 0.03 %/°C (0 - 50 °C)

vibraciones: 10 - 500 Hz, 5G 10 min/1 cycle, period for 60 min each along X, Y, Z axes

safety & EMC:

safety standards: UL60950-1, TÜV EN60950-1 approved

withstand voltage:

input to output: 3 kVAC

input to ground: 1.5 kVAC

output to ground: 0.5 kVAC

isolation resistance: input to output, input to ground, output to ground: 100 Mohm / 500 VDC / 25 °C / 70 % RH

EMC emission: compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3

EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11; EN61000-6-2 (EN50082-2), heavy industry level, criteria A

otras:

MTBF: min. 265,000 h, MIL-HDBK-217F (25 °C)

dimensions (L x W x H): 129 x 97 x 38 mm

weight: 410 g

Comprar ITE SWITCHING POWER SUPPLY - SINGLE OUTPUT - 75 W - 12 V - CLOSED FRAME

Ligações

Envio grátis a partir de 99€

Utilizamos mensagens expresso

Garantia de 3 anos

Em todas as nossas marcas

Atenção personalizada

Entre em contacto connosco

Iniciar sessão

ITE SWITCHING POWER SUPPLY - SINGLE OUTPUT - 75 W - 12 V - CLOSED FRAME

Descrição

Especificaciones

Ligações

Envio grátis a partir de 99€

Garantia de 3 anos

Atenção personalizada

Atenção ao cliente

Nova morada

Viu mais barato?

Alerta de preço

Avisar-me quando voltar

Partilhar produto

Configurar cookies